What temperature do you print PLA Wood at?

PLA Wood prints at a nozzle temperature of 190-220C with the bed at 50-60C. Start at the lower end of the nozzle range and raise it in 5C steps until layers bond cleanly.

Does PLA Wood need an enclosure?

No. PLA Wood prints fine on an open-frame printer at normal room temperature.

What is PLA Wood good for?

PLA Wood suits decorative pieces, prints you plan to sand or stain, signage and plaques. Avoid it for nozzles under 0.4mm, fine detail, structural parts.

How much does PLA Wood cost?

A 1 kg spool of PLA Wood typically sells for $25-40. That is an indicative street price rather than a live figure, so check the retailer for today's cost.

PLA Wood print settings

Wood-Filled PLA · Intermediate

PLA Wood (Wood-Filled PLA) prints at 190-220°C with the bed at 50-60°C. No enclosure needed. Drying is rarely necessary.

PLA mixed with wood fibre. It sands and stains like timber and can be colour-shifted by changing nozzle temperature.

Settings at a glance

Nozzle

190-220°C

Bed

50-60°C

Enclosure

Not needed

Part cooling

Yes

Retraction

0.2-0.4mm

Typical price

$25-40 / kg

Ranges are typical manufacturer-published figures for this material class, not measurements we took. Always start with your filament maker’s own numbers where they differ. The price is an indicative street price for a 1 kg spool, not a live quote.

Good for

Decorative pieces
Prints you plan to sand or stain
Signage and plaques

Avoid for

Nozzles under 0.4mm
Fine detail
Structural parts

The problem people actually hit

Clogging. Wood particles bridge a small nozzle easily. Use 0.4mm or larger and avoid long retractions.

Drying

Mildly hygroscopic. Dry at 45C for 4-6 hours.

Buying PLA Wood

PLA Wood is easy enough to find, though from fewer brands than PLA or PETG. Stick to sellers who publish a diameter tolerance. Typical street price is $25-40 per 1 kg spool.

Check before you order

Diameter 1.75mm unless your printer takes 2.85mm. Check before ordering, not after.
Published diameter tolerance. ±0.02mm is good, ±0.05mm is loose and shows up as inconsistent extrusion.

See PLA Wood filament on Amazon

Not sure this is the right material? Compare all materials.

What you need to print PLA Wood

Gear that PLA Wood genuinely requires, with the specification that decides whether a given unit will actually work.

Nozzle cleaning kit

Needles sized to your nozzle, plus a spare nozzle or two

PLA Wood is the material most likely to block a nozzle mid-print. Cleaning needles clear a partial blockage without a full teardown.

Assorted · Nozzle cleaning kit with needles0.4mm needles plus tweezers, thinner than the bore so the nozzle is not scored

As an Amazon Associate we earn from qualifying purchases. Links above are affiliate links, and using them costs you nothing extra.

PLA Wood questions

What temperature do you print PLA Wood at?: PLA Wood prints at a nozzle temperature of 190-220C with the bed at 50-60C. Start at the lower end of the nozzle range and raise it in 5C steps until layers bond cleanly.
Does PLA Wood need an enclosure?: No. PLA Wood prints fine on an open-frame printer at normal room temperature.
Do you need to dry PLA Wood?: Mildly hygroscopic. Dry at 45C for 4-6 hours.
What is PLA Wood good for?: PLA Wood suits decorative pieces, prints you plan to sand or stain, signage and plaques. Avoid it for nozzles under 0.4mm, fine detail, structural parts.
How much does PLA Wood cost?: A 1 kg spool of PLA Wood typically sells for $25-40. That is an indicative street price rather than a live figure, so check the retailer for today's cost.

PLA Wood or PLA?

PLA (Polylactic Acid) prints at 180-220°C with a 50-60°C bed and needs no enclosure. The default beginner filament. Prints cool, sticks well, warps very little, and needs no enclosure. It gives up heat resistance in exchange for all of that.

Read the PLA settings guide →