Inland PETG-CF Premium — PETG-CFFilament Review & Print Settings
Inland PETG-CF Premium (Carbon Fiber PETG). Micro Center's house brand. Very affordable, surprisingly consistent, and available in-store for immediate pickup. Carbon fiber PETG for improved stiffness without the warping risk of PA-CF. Good middle ground for functional parts. Print temp: 240-260°C. Bed: 80-90°C. Cooling fan: Yes. Enclosure: No.
Quick Specs
Print Settings Guide for Inland PETG-CF Premium
Set your nozzle temperature to the manufacturer-recommended range°C and your bed to 80-90°C. Start at the lower end of the print temperature range and increase by 5°C increments until you achieve clean layer bonding. A direct-drive extruder provides better control on most materials. First layer: slow to 25 mm/s and check bed adhesion before walking away. Dial in retraction for your specific printer — start at 5mm for Bowden, 2mm for direct drive.
Why Choose Inland PETG-CF Premium
Inland PETG-CF Premium is a PETG-CF filament from Inland that delivers reliable results across a range of print conditions. Community reception has been positive for its consistent diameter and batch-to-batch color accuracy. As a USA, it sits in a specific performance tier within the PETG-CF family. When comparing PETG-CF options, consider print temperature range, brand support, and availability of your preferred color.
What to Print with Inland PETG-CF Premium
Inland PETG-CF Premium is well-suited for projects that align with the mechanical and thermal properties of PETG-CF. Functional parts, display models, and tooling inserts are common applications. Match the material to the end-use environment: consider heat exposure, UV, humidity, and mechanical stress before committing to a full print run. Start with small test pieces to validate settings before printing large, time-intensive projects.
Common Issues & Fixes
PETG-CF filaments share common troubleshooting patterns. Stringing: reduce temperature and increase retraction. Bed adhesion failures: clean with IPA, adjust Z-offset, ensure correct bed temperature. Layer delamination: increase nozzle temperature and slow print speed. Moisture: store all filaments with desiccant and dry before use if stored over 3 months.
Where to Buy Inland PETG-CF Premium
Find Inland PETG-CF Premium from Amazon and authorized resellers. Price comparison helps — filament costs vary by vendor, fulfillment location, and quantity. Check manufacturer storefronts for direct pricing and bundle deals.
PrintLog3D participates in the Amazon Associates program. Purchases through our links may earn a small commission at no extra cost to you.
Log your PETG-CF prints in PrintLog3D
Track your actual settings for Inland PETG-CF Premium — nozzle temp, bed adhesion, slicer profile, and results. Build a settings history that tells you exactly what works.