Siraya Tech Smoky Black — ResinFilament Review & Print Settings
Siraya Tech semi-transparent smoky black resin. Unique aesthetic for display models and miniatures.
Quick Specs
Colors Available
Print Settings Guide for Siraya Tech Smoky Black
Resin printing operates on completely different physics from FDM — photopolymer resin is cured layer by layer with UV light (MSLA/DLP) rather than melted and extruded. Siraya Tech Smoky Black should be thoroughly shaken before use to suspend pigments evenly. Temperature matters: resin viscosity changes significantly with ambient temp — keep your resin and printer above 20°C (ideally 25–30°C) for optimal flow and adhesion. Exposure times vary by printer wattage and UV wavelength — start with manufacturer settings and adjust by ±5%. After printing: wash in IPA or dedicated resin cleaner for 3–5 minutes, cure under UV light for 2–5 minutes per side. Always wear nitrile gloves — uncured resin is a skin sensitizer.
Why Choose Siraya Tech Smoky Black
Siraya Tech Smoky Black delivers detail resolution that FDM filaments cannot match. Layer heights of 25–50 microns produce smooth surfaces, intricate undercuts, and fine features that require no post-processing sanding on most consumer MSLA printers. Siraya Tech formulates for consistent cure characteristics that reduce print failures from under or over-exposure. Standard (non-ABS-like) resins cure brittle — this is expected. Tough and ABS-like formulations add flexibility and impact resistance for functional miniature parts, custom jewelry, dental models, and engineering prototypes where FDM surface quality is insufficient.
What to Print with Siraya Tech Smoky Black
Siraya Tech Smoky Black is the tool for micro-detail work: tabletop miniatures (28mm scale and smaller), jewelry masters for casting, dental models, hearing aid shells, cosplay detail pieces, and architectural scale models requiring extreme surface quality. Product prototypes where injection-mold appearance matters use resin for client presentations. Watch components, gear trains at small scale, and micro-enclosures for PCBs are all resin territory. If the part needs to be machined or functional at scale, FDM is likely better — resin shines at small-scale, detail-critical applications where surface finish is non-negotiable.
Common Issues & Fixes
Prints not adhering to build plate: level the plate carefully, increase bottom exposure layers, clean FEP regularly. FEP film damage: replace FEP when you see cloudiness or scratches — it directly affects print quality. Suction cup failures on large flat parts: add relief holes or drain channels to flat surfaces. Resin pigment settling: shake bottle thoroughly before every pour. Brittle prints: this is normal for standard resin; switch to ABS-like or tough resin for functional parts. Safety: wear gloves, work in ventilated area, dispose of uncured resin per local hazardous waste regulations — do not pour down drains.
Notes
Siraya Tech semi-transparent smoky black resin. Unique aesthetic for display models and miniatures.
Where to Buy Siraya Tech Smoky Black
Find Siraya Tech Smoky Black from Amazon and authorized resellers. Price comparison helps — filament costs vary by vendor, fulfillment location, and quantity. Check manufacturer storefronts for direct pricing and bundle deals.
PrintLog3D participates in the Amazon Associates program. Purchases through our links may earn a small commission at no extra cost to you.
Log your Resin prints in PrintLog3D
Track your actual settings for Siraya Tech Smoky Black — nozzle temp, bed adhesion, slicer profile, and results. Build a settings history that tells you exactly what works.